تويت
Training in entering code into 26 different receivers
-For Receivers Starsat Model 550-650-3100-3200-3500 If programmed with a new program, first enter the coding menu to enter the menu, then go to the installition option and select the inpud cod option. Appears and you can enter codes
At the start of the Sr-x5d you press the zero button. Also to enter the base coding page, menu button then red control button.
************************************************** **********************
2- For Receivers Starsat 120-130-150-200Astra-Starcom - Omax To enter the coding menu, this Receiver first hit the menu then go to Stbseting but do not enter it. Enter 1234 to enter the code table. Appear.
Also, press the Zero button on one of the coded channels for the 190 and 220 models
************************************************** **********************
3. For Receivers SkyX and Strong Model II4610-4620-4630-4800II To enter the coding menu This Receiver Scroll to a coded channel and enter 8282 to display the code table
************************************************** **********************
4- All Topfiled Receivers To enter the encoding menu of this Receiver enter the menu then go to the Receiver Version display area and enter 121 to display the code table.
5. For the Starport 9550 Receivers to enter the menu, code this Receiver, hit the menu then go to Receiver Status section where it is related to ******************************** change, enter 9999 to display the code table.
************************************************** **********************
6- For the mvisaion decoders to enter the menu, first code the menu, then dial 9999 until the code table appears.
************************************************** **********************
7. For technosat decoders to enter the coding menu This decoder must go to the coded channel then enter 9911 to display the code table.
************************************************** **********************
8. For techview decoder To enter the encoder menu, just press the red key 4 times on the control to make the code table appear.
************************************************** **********************
9- For troman decoders to enter the menu, encode this decoder menu then go to the ******************************** selection and ok then enter 9999 to display the code table.
************************************************** **********************
10- For the Lorance Receivers to enter the menu, first code the menu then go to system information and 2121 then enter the edit key and 9244 to enter the code.
11. Fortecstar 9800 Receivers To enter the coding menu first hit the menu then dial 9244 and click OK to display the code table.
************************************************** **********************
12- Cardless Lazer Receivers To enter the coding menu first hit the menu then enter number 9317 to make the code table appear.
************************************************** **********************
13- For Laser 2003 ci decoders To enter the menu, decoder this menu first hit the menu then hit 1234 to make the code table appear.
************************************************** **********************
14. For the Qmax Receivers to enter the coding menu on the coded channel and press the exit key to make the code table appear.
************************************************** **********************
15- For Digital-allword decoders to enter the coding menu on the coded channel and press the exit key to display the code table.
************************************************** **********************
16. Enter the code number 1004 for the e **** box 1 & 2 decoders in the menu.
************************************************** **********************
17. Enter the code 1010 for the Fortecstar 5600 plus receivers, and for the Fortecstar Lifetime receiver, enter the sauce menu in the input code field 1010 for the Fortecstar Plati receivers on the edit code 1001 and enter the Fortecstar 5600 models. -V2 LG TINOR Model First enter the menu next to ******************************** and then the safe mode section 2003
************************************************** **********************
18-For the first Startrack decoders menu next to Lock control part number 19370 which then tells you to enter the code you hit number 2486 but nothing happens here. Go to the Game section and you will see the code page for Digisat Do the same.
************************************************** **********************
19. Enter the number 9999 for the Ranger and Super Lazer 15000 decoders and the first mvisaion menu next to 9999, where a column will be added to the name Smart Card where you can edit codes.
************************************************** **********************
20. For the Starport 9550 Receivers, first hit the menu then go to the Stb status section in the ******************************** section to enter the 9999 number to display the code table.
-For Receivers Starsat Model 550-650-3100-3200-3500 If programmed with a new program, first enter the coding menu to enter the menu, then go to the installition option and select the inpud cod option. Appears and you can enter codes
At the start of the Sr-x5d you press the zero button. Also to enter the base coding page, menu button then red control button.
************************************************** **********************
2- For Receivers Starsat 120-130-150-200Astra-Starcom - Omax To enter the coding menu, this Receiver first hit the menu then go to Stbseting but do not enter it. Enter 1234 to enter the code table. Appear.
Also, press the Zero button on one of the coded channels for the 190 and 220 models
************************************************** **********************
3. For Receivers SkyX and Strong Model II4610-4620-4630-4800II To enter the coding menu This Receiver Scroll to a coded channel and enter 8282 to display the code table
************************************************** **********************
4- All Topfiled Receivers To enter the encoding menu of this Receiver enter the menu then go to the Receiver Version display area and enter 121 to display the code table.
5. For the Starport 9550 Receivers to enter the menu, code this Receiver, hit the menu then go to Receiver Status section where it is related to ******************************** change, enter 9999 to display the code table.
************************************************** **********************
6- For the mvisaion decoders to enter the menu, first code the menu, then dial 9999 until the code table appears.
************************************************** **********************
7. For technosat decoders to enter the coding menu This decoder must go to the coded channel then enter 9911 to display the code table.
************************************************** **********************
8. For techview decoder To enter the encoder menu, just press the red key 4 times on the control to make the code table appear.
************************************************** **********************
9- For troman decoders to enter the menu, encode this decoder menu then go to the ******************************** selection and ok then enter 9999 to display the code table.
************************************************** **********************
10- For the Lorance Receivers to enter the menu, first code the menu then go to system information and 2121 then enter the edit key and 9244 to enter the code.
11. Fortecstar 9800 Receivers To enter the coding menu first hit the menu then dial 9244 and click OK to display the code table.
************************************************** **********************
12- Cardless Lazer Receivers To enter the coding menu first hit the menu then enter number 9317 to make the code table appear.
************************************************** **********************
13- For Laser 2003 ci decoders To enter the menu, decoder this menu first hit the menu then hit 1234 to make the code table appear.
************************************************** **********************
14. For the Qmax Receivers to enter the coding menu on the coded channel and press the exit key to make the code table appear.
************************************************** **********************
15- For Digital-allword decoders to enter the coding menu on the coded channel and press the exit key to display the code table.
************************************************** **********************
16. Enter the code number 1004 for the e **** box 1 & 2 decoders in the menu.
************************************************** **********************
17. Enter the code 1010 for the Fortecstar 5600 plus receivers, and for the Fortecstar Lifetime receiver, enter the sauce menu in the input code field 1010 for the Fortecstar Plati receivers on the edit code 1001 and enter the Fortecstar 5600 models. -V2 LG TINOR Model First enter the menu next to ******************************** and then the safe mode section 2003
************************************************** **********************
18-For the first Startrack decoders menu next to Lock control part number 19370 which then tells you to enter the code you hit number 2486 but nothing happens here. Go to the Game section and you will see the code page for Digisat Do the same.
************************************************** **********************
19. Enter the number 9999 for the Ranger and Super Lazer 15000 decoders and the first mvisaion menu next to 9999, where a column will be added to the name Smart Card where you can edit codes.
************************************************** **********************
20. For the Starport 9550 Receivers, first hit the menu then go to the Stb status section in the ******************************** section to enter the 9999 number to display the code table.